Our company was founded on the idea of designing a product line that was way beyond the normal. We wanted to give the "Best Service - Have The Best Integrity - With No Compromise In The Product". We wanted products that would operate in the worst conditions and last.
First we had to find that line-up of products that would meet our standards that we had put in place.
That was not an easy task.
These are the High Quality Products we have chosen:
EMEC is an Italian chemical metering pump that is astounding in it's construction and performance! It has a Solid Teflon Diaphragm (Diaphragm carries a 5 year warranty.) The pump head and the valves which are molded into the head is made of PVDF material. It has an automatic Gas-Off valve that is also molded into the pump head, that really works. You can also order the manual Bleed Valve in place of the auto Gas-Off if preferred. This pump does not require a repair kit. Let me say that again. No repair kit required. This pump is extremely tough, NEMA 4X Rated. This pump has manual controls or you can order it with multifunction digital controls which include constant, divide, multiply, ppm, batch, volt, 4/20mA, pulse, stand-by and flow sensor in-put and alarm out-put.
Needless to say it meets our standards and it will meet yours too.
EMEC PRIUS metering pumps come in Three Configurations.
The first is the Manual Pump with Stroke Adjustment and a standard single or 3 phase C frame motor.
The second is the Manual pump with the Stroke Adjustment plus a 3 phase
inverter duty motor and a VFD controller that can be mounted remotely. The VFD controller gives the pump Multifunction compacity such as 4-20mA input and output signals, motor frequency, relay outputs and start/stop. The
VFD controller is digital with keypad and LCD readout display.
The third is the EMEC PRIUS Multifunction metering pump. This Multifunction pump has the digital control panel built into the base of the pump, with the ability to rotate the base to the left if needed for better viewing. The Multifunction pump has the Stroke Adjustment as well as a
4-20mA input signal, Constant Working Mode, ppm, %, pulse, Volt and
EMEC PRIUS, "A PUMP BUILT TO LAST"
Materials of Construction:
The pump housing is Aerospace Aluminium, Brass and SS oil-filled Gear Box, Pump Head depending on what Chemical is being used (PVDF, PP, SS) Seals
(Viton, EPDM, NBR) Diaphragm is Solid Teflon (Carries a 5 Year Warranty),
Valves (PVDF, PP, SS) Balls, Ceramic-2, Manual Degas/Bleed Valve
Capacities and PSI @ 60Hz
PRUIS D Range From 17gph (27 l/h) @ 150psi to 251gph (950 l/h) @ 45psi
PRIUS D AP Range From 36gph (138l/h) @ 300psi to .4gph (1,5l/h) @ 1,500psi
Blue-White Chem-Pro Series is a Diaphragm Metering Pump with capacities from .02gph to 40gph, with pressures to a max of 175psi. One of the outstanding features of the pump is the diaphragm. It is made of solid PVDF material and is manufactured at Blue-White to insure strict quality control. The pump head and the valves are also made of PVDF material making this pump stand tough up against a multitude of chemicals. This is a quiet variable speed dc drive pump, full stroke every time, with LCD read-out and keypad. Out-put adjustment range is from 1-100% in 0.1 increments, maximum viscosity is 1,000 centipoise and maximum suction lift is 15 ft. depending on the application. The pump comes with manual speed control and remote start/stop. The multifunction pump comes SCADA ready with 4/20mA in-put, signal out-puts include relay (3amp), open collector, 4/20mA and remote start/stop. The pump housing is 413 Aluminum (polyester powder coated) and the pump is rated NEMA 4X (IP 66) Washdown.
This pump is solid bult, very reliable and is "Made in America". We are very pleased to have it in our product line-up.
Grundfos Smart Digital Dosing metering pump series is highly unique. Its impressive intelligence and decision making capabilities go beyound any existing metering pump technology in the market.
Take the Grundfos DDA-SMART Digital Series pumps (0.0007 to 8gph) for example. The DDA can not onlyinject chemicals and verify injection; it can also measure valuable data such as flow or pressure. The pump can then diagnose the operation status based on the relationship between the solid Teflon diaphragm displacement and the pressure inside the head. This technology goes even further. Thanks to its impressive logic capabilities, the DDA can make decisions to display and/or correct failures such as overpressure, valve leaks or air bubbles.
Grundfos SMART Digital Series pumps have a Smooth and Continuous Dosing. This ensures an optimum mixing ratio at the injection point without the need for additional accessories, such as static mixers. It provides significant reduction of pressure peaks, preventing mechanical stress on wearing parts such as diaphragm, tubing and connections, resulting in less maintenance required. It also ensures that no liquid passes without continuous chemical injection into the process line.
Full Stroke Length at All Times, irrespective of capacity set; this ensures maximum volume displacement per stroke, optimum accuracy, easy priming and improved suction.
Up to 3000:1 Turndown Ratio on SMART Digital Series DDA, 1000:1 Turndown Ratio on SMART Digital
Series DDC and DDE.
There are so many features that the Grundfos SMART Digital Series offers that I have included a file for you to click on to see for yourself......
Series 100 Models - The preferred metering pump for water conditioning professionals around the world. Perfect for applications where economical, consistent performance is required. Capable of a wide range of flows, from less than 3 GPD (0.47 lph) up to 30 GPD (4.72 lph) and pressures up to 100 PSIG (7 BAR). This pump is fan cooled motorized, sealed gear train technology with manual feed rate control.
Series 150 Models - Build upon the same solid platform as the 100 Models. With a range offering up to 100 GPD (15.76 lph) with max pressure of 60 PSIG (4.2 BAR). This pump is fan cooled motorized, sealed gear train technology with manual feed rate control.
Series 200 offers feed rates from 10 to 120 GPD (1.5 to 18.9 lph) and operating pressures up to 150 PSIG (10.3 BAR). This pump is motorized, oil immersed gear train technology, Heavy duty fan cooled motor with manual feed rate control.
Series 250 offers feed rates to 108 GPD (17 lph) and operating pressures up to 225 PSIG (15.5 BAR). This pump is motorized, oil immersed gear train technology, Heavy duty fan cooled motor with manual feed rate control.
The Pulsatron Series C offers manual stroke length adjustment with fixed stroke rate. Four models are available. having pressure capabilities of 80 PSIG (5.6 BAR) and flow capacities up to 30 GPD (4.7 lph). This pump is Solenoid driven with a 10:1 turndown. Automatic Control by external pacing with prime switch is (Optional).
The Pulsatron Series A Plus offers manual function controls over stroke length and stroke rate. Ten models are available, having pressure capabilities to 250 PSIG (17 BAR) @ 12 GPD (1.9 lph), and 58 GPD (9.1 lph) @ 100 PSIG (7.0 BAR), with a turndown ratio of 100:1, and optional ratio of 1000:1. Optional Control: External pace with auto/manual selection.
The Pulsatron Series E offers manual function control over stroke length and stroke rate providing a turndown rate of 100:1.
Twenty models are available, having pressure capabilities to 250 PSIG (17 BAR) @ 5 GPD (0.8 lph), and flow capacities to 44 GPD (7 lph) @ 100 PSIG (7 BAR), with a turndown rate of 100:1. This pump is Solenoid driven. Easy Priming with Bleed valve assembly (standard), High viscosity up to 3,000 CPS available.
The Pulsatron Series E plus offers manual control over stroke length and stroke rate as standard with the option to choose between 4-20mA and external pace inputs with stop function for automatic control.
Twenty models are available, having pressure capabilities to
300 PSIG (21 BAR) @ 3 GPD (0.5 lph), and flow capacities to 600 GPD (94.6 lph) @ 30 PSIG (2 BAR). This pump is Solenoid driven. High viscosity up to 3,000 CPS available.
The Pulsatron Series MP is microprocessor controlled for precise and accurate metering control. Pack with standard features, the Series MP includes automatic control via 4/20mA or 20/4 mA inputs (fully scalable), external pace with stop features and 16 character backlit LCD display. Flow Verification on select sizes with flow totalization, Relay output for computer interface or AC Power. Alarm Siginals for signal loss, full count, circuit failure,pulse overflow and pulse rate high, liquid low-level indicator capability i standard. Pulse signals can be mulplied or divided by 1-999. Flow rate is displayed as GPH, GPD or LPH, turndown ratio is 1000:1. High Viscocity up to 3,000 CPS available.
Nineteen models are available, having pressure capabilities to 300 PSIG
(21 BAR) @ 3 GPD (0.5 lph), and flow capacities to 504 GPD (79.5 lph) @ 20 PSIG (13 BAR).
The Pulsatron Series HV is designed for high viscosity applications. The Series HV offers manual control over stroke length and stroke rate with option to choose between 4/20mA and external pace inputs for automatic control. Five models are available, having pressure capabilities to 150 PSIG (10 BAR) @ 12 GPD (1.9 lph), and flow capacities to 240 GPD (37.9 lph) @ 80 PSIG (5.6 BAR) with a turndown ratio of 100:1. This pump is Solenoid driven, Viscosities to 20,000 CPS.
The Pulsatron Series T7 was designed to feed chemicals on a timed schedule. Typical applications include biocides in open-air cooling towers. A 7- day programmable timer controls the T7. Other control features include a standby mode, continuous 'ON' mode and the abilityto adjust the stroke length from 0 to100%.
Four models are available, having pressure capabilities to 100 PSIG (7.0BAR) @ 12 GPD (1.9 lph), and flow capacities to 48 GPD
(7.6 lph) @ 50 PSIG (3.3 BAR), with a turndown ratio of 10:1
The BLACKLINE Series MD is a motor driven, spring return mechanical diaphragm metering pump for precise and accurate metering control. The MD series is oil lubricated which is contained in the anodized aluminum gear housing. The diaphragm is long life reinforced PTFE (Teflon) material. This pump has a micrometer style adjustment stroke length control with a 10:1 turndown.
Optional Feature is a Variable Frequency Drive (VFD) for Automatic Control , fully scalable 4-20 mA, 0-10 VDCF siginal, in NEMA 4X Enclosure. This VFD control offers a 100:1 turndown.
Nine models are available, having flow capabilities to 132 GPH (500 LPH) and pressures to 150 PSIG (10 BAR) This pump is a high viscoty pump up to 1000
Pro Metering Technology Ph 678-333-7860 Fax 1-800-503-9701